Insulating Rod Kit for Cleaning the Windows of Electric Locomotives

In accordance with EN/IEC 61243-1 (DIN VDE 0682 Part 411) insulating rods typ IS 25 ZK 2885 can be used for nominal voltages up to 7.5 kV d.c. and 25 kV a.c. even in wet weather conditions.

• For use in wet weather
  
• Insulating rod kit for cleaning the windows of electric locomotives
  
• Protection against accidential contact with live parts (e.g. overhead contact lines)
• Inclination angle of the operating head can be adjusted

Detailed technical information

Insulated platform IW

The insulated platform and the GRP extension are used for e.g. replacing illuminants at airport lighting systems under live conditions.

The insulated platform insulates the standing surface during live working. The GRP extension is used as insulating intermediate section between ratchet and operating head.

• Not for use in wet weather
  
• Equipment for live maintenance and repair work at airport lighting systems
  
• Insulated platform for insulating standing surfaces
  
• Circumferential, fluorescent marker tape indicates maximum permissible height for plants when used in green spaces and can be used as reflector at night
  
• Two removable kneeling cushions for comfortable working
  
• Replacable skids for easy positioning and transport

For beacons up to max. 225 mm Ø

Detailed technical information IW

Non-Contact Voltage Detector Kit ASP

• For use in wet weather
  
• For overhead lines and outdoor switching stations
  
• With self-testing element
  
• Visual and acoustic indication
  
• Fast battery replacement without the use of additional tools

Detailed technical information ASP

Insulating Rod Kit IS STK

• Not for use in wet weather
  
• For indoor and outdoor installations
  
• Plug-in coupling protected against twisting and bridging
  
• Easy transport due to detachable rods
  
• Kits for a variety of applications
  
• For use as switching rod, earthing rod or operating rod

Face Shield

Protection against exposure to arcing faults.
A coating on the inner surface prevents misting up, polished edges, 1.5 mm thick
The U-shaped rubber strap can be attached to all types of safety helmets with or without drip peak. The face shield can be locked in two positions: in "use" an in "non-use" position.

• Face shield in accordance with DIN EN 166
  
• Underwent 4 kA / 0,5 s arcing fault test in accordance with GS - ET - 29
  
• Face shield protected against misting up

Detailed technical information face shield

Protective Glove

Protective gloves Type APG (Arc. Protective Glove) are particularly designed for maintenance and repair work in and at electrical installations. The protective gloves as well as the material used have been tested in accordance with EN 61482-1-2 (box test) for protection against skin burns due to thermal hazards of an arcing fault.

• For maintenance and repair work at electrical installations
  
• For protection against thermal and mechanical risks
  
• Underwent 7 kA/0.5 s arcing fault test (box test) in accordance with EN 61482-1-2 (DIN VDE 0682 Part 306-1-2)
  
• EC type-examination certificate issued by an accredited certification body
  
• Excellent fit due to special glove cut
  
• Good touch sensitivity due to soft leather inner surface of the gloves
  
• High wearing comfort due to use of breathable materials

Detailed technical information